Scooter Pegs

What are scooter pegs and why use them?

Pegs for scooters are small metal or aluminium tubes mounted on the wheel axles to make it easier to perform grinds, stalls and manuals. They’re mainly used on trick and stunt scooters in skateparks and out on the street, where control and durability are key. Here you’ll find several good options for different setups.

In this category, you’ll find a solid range of pegs for different wheel and fork types, allowing you to adapt your setup to your own riding style. Whether you want pegs on the front, back or all four wheels, it’s about choosing the right length, material and compatibility with your scooter.

How to choose the right pegs

The most important thing when choosing pegs is to make sure they fit your deck, wheels and axle bolts, and that they can handle your riding style. Pay close attention to the following points when comparing models:

• Axle and wheel compatibility – check whether the peg fits the axle bolt diameter and wheel width so there’s enough space for the wheel, spacer and peg.
• Peg length – shorter pegs are lighter and more stable for technical tricks, while longer pegs give you more room for grinds but can catch more easily on edges.
• Material – aluminium is lightweight and ideal for controlled park tricks, while steel is heavier but more durable for tough street grinds.
• Durability and use – if you ride a lot of rails and kerbs, go for pegs made from a strong alloy with solid wall thickness so they don’t wear through too quickly.
• Mounting and hardware – check if longer axle bolts are included or if you need to buy them separately, so you can mount the pegs securely without any movement.

Also think about weight versus strength: lighter pegs make your scooter more responsive, while heavier steel pegs often give better stability and a longer lifespan, especially for experienced riders.

Rider level, style and safe use

Beginners can easily start with pegs, but you should master basic jumps and balance before trying grinds. For park riding, many go for shorter and lighter pegs for quick rotations, while street riders often prefer slightly longer and tougher pegs for rails, walls and kerbs.

Always use pegs along with an approved helmet and ideally knee and shin protection, as mistakes on rails and edges can easily lead to impact injuries. Regularly check that the bolts are properly tightened and that the pegs aren’t cracked or worn so thin that they could break.

Once you’ve found the pegs that match your level and riding style, the next step is to mount them correctly, test them carefully, and then gradually build up your grinds and stalls.