NKD Brakeless Scooter Fender - NKD Scooters comes with breaks, but we know that riders often to take it off completely. That leaves one big problem. With no brake there is a big chance that you step on your back wheel, or even rub into it while pushing. 

Therefore we introduce the NKD brakeless Scooter Fender. This makes the landing area on the deck even bigger, beacause you can actually land on the fender, without the scooter stopping or loosing speed. 

It currently comes in the colors Black and Neo Chrome.

NKD Brakeless Scooter Fender - NKD Scooters comes with breaks, but we know that riders often to take it off completely. That leaves one big problem. With no brake there is a big chance that you step on your back wheel, or even rub into it while pushing. 

Therefore we introduce the NKD brakeless Scooter Fender. This makes the landing area on the deck even bigger, beacause you can actually land on the fender, without the scooter stopping or loosing speed. 

It currently comes in the colors Black and Neo Chrome.

NKD SCS pro clamp is a clamp that is designed for SCS compression systems and fits both oversized and standard bars. It is made of aluminum and is therefore lightweight. A shim is included, which you can take out if you need it for an oversized bar.

NKD SCS pro clamp is a clamp that is designed for SCS compression systems and fits both oversized and standard bars. It is made of aluminum and is therefore lightweight. A shim is included, which you can take out if you need it for an oversized bar.

NKD integrated pro headset is a headset which fits decks that have integrated headset cups. The bearings are closed and shielded from dirt and grime. The crown race and dust cap are included in the package.

NKD integrated pro headset is a headset which fits decks that have integrated headset cups. The bearings are closed and shielded from dirt and grime. The crown race and dust cap are included in the package.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

NKD MV signature pro deck is a deck that has been designed in cooperation with NKD team rider Mathias Villers. The design has a graffiti theme - his name is written in graffiti font and contains different patterns and urban numbers. The deck is limited edition. The deck is made of aluminum and has a material strength of T6. The deck has integrated headset cups. The deck is 139 mm wide and 550 mm long. Remember to buy grip tape as it is not included.

• Wheel Compatibility: Fits wheels with diameters of 100mm (3.94"), 110mm (4.33"), and 120mm (4.72"), offering flexibility in wheel choice.
• Dimensions Optimized for Control: Measures 560mm (22") in length and 150mm (6") in width, providing ample space and stability.
• Lightweight Construction: Weighs only 1920g (67.72 oz), crafted to be lightweight for enhanced agility.
• Box-Cut Dropout Shape: Features a box-cut dropout with integrated pegs, allowing for smooth grinds and effortless tricks.
• Shallow Concave: Adds a comfortable and controlled foot placement, ideal for both park and street riding.