Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

NKD SCS pro clamp is a clamp that is designed for SCS compression systems and fits both oversized and standard bars. It is made of aluminum and is therefore lightweight. A shim is included, which you can take out if you need it for an oversized bar.

NKD SCS pro clamp is a clamp that is designed for SCS compression systems and fits both oversized and standard bars. It is made of aluminum and is therefore lightweight. A shim is included, which you can take out if you need it for an oversized bar.

With Euroskateshop griptape, you're guaranteed to get griptape of world-class quality. Our many designs ensure that you can find something to suit your style and help you stand out from the crowd. Whether it's colorful or black/white, there's something for you.

Our griptape comes in 152 mm x 584 mm, giving you the option to cut it to the perfect size for your stunt scooter.

With Euroskateshop griptape, you're guaranteed to get griptape of world-class quality. Our many designs ensure that you can find something to suit your style and help you stand out from the crowd. Whether it's colorful or black/white, there's something for you.

Our griptape comes in 152 mm x 584 mm, giving you the option to cut it to the perfect size for your stunt scooter.

With Euroskateshop griptape, you're guaranteed to get griptape of world-class quality. Our many designs ensure that you can find something to suit your style and help you stand out from the crowd. Whether it's colorful or black/white, there's something for you.

Our griptape comes in 152 mm x 584 mm, giving you the option to cut it to the perfect size for your stunt scooter.

With Euroskateshop griptape, you're guaranteed to get griptape of world-class quality. Our many designs ensure that you can find something to suit your style and help you stand out from the crowd. Whether it's colorful or black/white, there's something for you.

Our griptape comes in 152 mm x 584 mm, giving you the option to cut it to the perfect size for your stunt scooter.

NKD Brakeless Scooter Fender - NKD Scooters comes with breaks, but we know that riders often to take it off completely. That leaves one big problem. With no brake there is a big chance that you step on your back wheel, or even rub into it while pushing. 

Therefore we introduce the NKD brakeless Scooter Fender. This makes the landing area on the deck even bigger, beacause you can actually land on the fender, without the scooter stopping or loosing speed. 

It currently comes in the colors Black and Neo Chrome.

NKD Brakeless Scooter Fender - NKD Scooters comes with breaks, but we know that riders often to take it off completely. That leaves one big problem. With no brake there is a big chance that you step on your back wheel, or even rub into it while pushing. 

Therefore we introduce the NKD brakeless Scooter Fender. This makes the landing area on the deck even bigger, beacause you can actually land on the fender, without the scooter stopping or loosing speed. 

It currently comes in the colors Black and Neo Chrome.

NKD extreme deck is a deck with integrated headset cups. The Neck and headtube of this deck is 3D designed and forged in one piece. One piece of material is much stronger. The deck is made of aluminum and is therefore lightweight. The deck is designed with cutouts that makes it even more lightweight. Cutouts are made in the logo in the deck itself and in the headtube. The deck is 125 mm wide and 530 mm long. Remember to buy grip tape as it is not included.

NKD extreme deck is a deck with integrated headset cups. The Neck and headtube of this deck is 3D designed and forged in one piece. One piece of material is much stronger. The deck is made of aluminum and is therefore lightweight. The deck is designed with cutouts that makes it even more lightweight. Cutouts are made in the logo in the deck itself and in the headtube. The deck is 125 mm wide and 530 mm long. Remember to buy grip tape as it is not included.

NKD F1 is a light weight and strong bar for pro scooters. The bar can be used by anyone who likes scooters and enjoy doing stunt after stunt on the ramps in the skate park. It comes with a slit and is compatible with the IHC compression system, which means that the bar is suitable for scooters with this exact type of compression. Furthermore, an included adapter makes the scooter bar compatible with SCS compression systems as well.

The bar is designed as a one-piece bar and consists of aluminum. The material of the NKD F1 bar contributes to an incredibly lightweight bar, which due to the design maintains a high strength and excellent durability.

As an oversized scooter bar with an outer diameter of 35 mm, you will need an oversized clamp for when you start putting together your stunt scooter.

If you need a bar for your stunt scooter that is both light and strong, then NKD F1 is the bar for you

NKD F1 is a light weight and strong bar for pro scooters. The bar can be used by anyone who likes scooters and enjoy doing stunt after stunt on the ramps in the skate park. It comes with a slit and is compatible with the IHC compression system, which means that the bar is suitable for scooters with this exact type of compression. Furthermore, an included adapter makes the scooter bar compatible with SCS compression systems as well.

The bar is designed as a one-piece bar and consists of aluminum. The material of the NKD F1 bar contributes to an incredibly lightweight bar, which due to the design maintains a high strength and excellent durability.

As an oversized scooter bar with an outer diameter of 35 mm, you will need an oversized clamp for when you start putting together your stunt scooter.

If you need a bar for your stunt scooter that is both light and strong, then NKD F1 is the bar for you